8.
Select a location where the condensation water
2.
3.Select a location which is convenient to conne-
ct the outdoor unit and near the power socket.
4.
5.
6.
3.
Selection of installation location
Requirements for electric connection
Basic requirement
Installing the unit in the following places may cau-
se malfunction. If it is unavoidable, please consu-
lt the local dealer:
3.
4.
5.
6.
7.
Indoor unit
laundry.
2.
1.
can be dispersed easily and won't affect other
people.
5.
2.
Safety precaution
It’s not allowed to be installed on the unstable
or motive base structure
(such as truck) or in
the corrosive environment (such as chemical
factory).
1.
Select a location which is out of reach for chil-
dren and far away from animals or plants. If it
is unavoidable, please add the fence for safety
purpose.
The location
5.
6.
2.
3.
should be able to withstand t he
There should be no obstruction near air inlet
and air outlet.
4.Select a location which is out of reach for children.
Must follow the electric safety regulations w-
hen installing the unit.
Grounding requirement
Do not put through the power before finishing
According to the local safety regulations, use
uirement of installation dimension diagram.
weight of outdoor unit.
4.Make sure that the installation follows the req-
An all-pole disconnection switch having a co-
ntact separation of at least 3mm in all poles
should be connected in fixed wiring.
qualified power supply circuit and air switch.
installation.
7.If the supply cord is damaged, it must be repla-
The yellow-green wire in air conditioner is
air emitted by the outdoor unit will not affect
Outdoor unit
1.Select a location where the noise and outflow
grounding wire, which can't be used for other
purposes.
neighborhood.
2.The location should be well ventilated and dry,
in which the outdoor unit won't be exposed dir-
ectly to sunlight or strong wind.
The grounding resistance should comply with
Including an circuit break with suitable capacity,
please note the following table. Air switch
should be included magnet buckle and heating
buckle function, it can protect the circuit-short
and overload. (Caution: please do not use the
fuse only for protect the circuit)
7.
Please try your best to keep way from fluores-
cent lamp.
8.
Don't install the indoor unit right above the ele-
ctric appliance.
The location should be able to withstand the
The place near coast area.
The place with oil or fumes in the air.
The place with sulfureted gas.
Other places with special circumstances.
The appliance shall not be installed in the
flammable or explosive gas, or volatile objects
spread in the air.
1.The place with strong heat sources, vapors,
The place with high-frequency devices (such
as welding machine, medical equipment).
national electric safety regulations.
T h e appliance must be positioned so that the
plug is accessible.
8.The temperature of refrigerant circuit will be hi-
4.Properly connect the live wire, neutral wire and
with national wiring regulations.
1.The air conditioner is the first class electric
from the copper tube.
9.The appliance shall be installed in accordance
appliance. It must be properly grounded with
specialized grounding device by a professional.
Please make sure it is always grounded effecti-
vely, otherwise it may cause electric shock.
3.Make sure the power supply matches with the
ced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a
hazard .
weight of indoor unit and won't increase noise
and vibration.
6.The appliance must be installed 2.5m above
floor.
requirement of air conditioner. Unstable power
supply or incorrect wiring or malfunction. Pl-
ease install proper power supply cables before
using the air conditioner.
1
9
gh, please keep the interconnection cable away
grounding wire of power socket.
5.Be sure to cut off the power supply before pr-
oceeding any work related to electricity and safety.
