7
●
●
When selecting auto mode, air conditioner will operate automatically according
to the sensed temperature. Set temperature can’t be adjusted and will not be
displayed as well. Press "FAN" button can adjust fan speed. Press " " / " "
button can adjust fan blowing angle.
●
●
After selecting cool mode, air conditioner will operate under cool mode. Cool
indicator " " on indoor unit is ON (This indicator is not available for some
models). Pres
▲
s "▲" or " " button to
adjust set temperature. Press "FAN"
button to adjust fan speed. Press " " / " " button to adjust fan blowing angle.
When selecting dry mode, the air conditioner operates at low speed under dry
mode. Dry indicator " " on indoor unit is ON (This indicator is not available
for some models). Under dry mode, fan speed can’t be adjusted.
Press " " / " " button to adjust fan blowing angle.
●
When selecting fan mode, the air conditioner will only blow fan, no cooling and
no heating. All indicators are OFF,Operation indicator is ON. Press "FAN" button
to adjust fan speed. Press" " / " " button to adjust fan blowing angle.
Note:
●
●
When selecting heating mode, the air conditioner operates under heat mode.
Heat indicator " " on indoor unit is ON (This indicator is not available for some
models). Press "▲" or "▲" button to adjust set temperature. Press "FAN" button
to adjust fan speed. Press " " / " " button to djust fan blowing angle. (Cooling
only unit won’t receive heating mode signal. If setting heat mode with remote
controller, press ON/OFF button can’t start up the unit).
After putting through the power, the air conditioner will give out a sound.
Operation indicator " " is ON (red indicator the colour is different for different
models). After that, you can operate the air conditioner by using remote controller.
Under on status, pressing the button on the remote controller, the signal icon " "
on the display of remote controller will blink once and the air conditioner will give
out a “di” sound, which means the signal has been sent to the air conditioner.
MODE button
2
1
ON/OFF button
Press this button to turn on the unit. Press this button again to turn off the unit.
Press this button to select your required operation mode.
HEAT
AUTO COOL DRY
FAN
●
This is a general use remote controller, it could be used for the air conditioners
with multifunction; For some function, which the model doesn't have, if press
the corresponding button on the remote controller that the unit will keep the
original running status.
Introduction for buttons on remote controller
