NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
14
Embers
8.
Place the glowing embers on the burner as shown in Figure 29.
One package of ember material has been included with this log set
You will not need to use the entire bag.
IMPORTANT: The quantity and placement of the ember material can
affect insert performance therefore it is very important that it be placed
as shown in Figure
29
.
a. Unpackage and divide the fi ne ember material (mineral wool) into
dime-sized fl uffy pieces.
b. Distribute the pieces over the top of the front burner ports, fi lling the
area in front of the forward logs.
Figure 29
Figure 30
9.
Place some vermiculite around the logs as shown in Figure 30 (the
entire bag of vermiculite will NOT be used).
Vermiculite
Figure 27
7.
Install the Top Right Log into the corresponding indentations on
Front Center Log and front right twig as shown in Figure 28.
Figure 28
Front Center Log
Top Right Log
4
. Place the Front Left Log onto the 2 corresponding locating pins as
shown in Figure 25.
Figure 25
5.
Install the Top Left Log onto the corresponding locating pin and
indentation on Center Log as shown in Figure 26.
Figure 26
6.
Install the Front Center Log over the Front Right Log . The front
of log will rest on the burner and the back of log will rest on rear log
as shown in Figure 27.
Front Left Log
Top Left Log
Summary of Contents for EVB125
Page 19: ......
