INTRODUCTION
e-BALTIC-IOM-2020.12-EN
3
NOTES FOR UNIT FITTED WITH GAS BURNER
THE UNIT MUST BE INSTALLED IN ACCORDANCE WITH LOCAL SAFETY CODES AND REGULATIONS AND CAN ONLY BE USED
IN WELL VENTILATED AREA.
IF MACHINE IS INCLUDING GAS BURNER, MINIMUM CLEARANCE AROUND THE UNIT MUST BE AT LEAST 8 M TO ALLOW A
PROPER COMBUSTION FUMES DILUTION. IF NOT POSSIBLE, THE FRESH AIR INTAKE MUST BE DUCTED AT LEAST 8 M AWAY
FROM THE GAS BURNER EXHAUST.
PLEASE READ CAREFULLY THE MANUFACTURER’S INSTRUCTIONS BEFORE STARTING THIS UNIT
Switchgear must be installed on each unit in accordance with the Machine Directive and the standard
EN 60204.
THIS MANUAL IS ONLY VALID FOR UNITS DISPLAYING THE FOLLOWING CODES:
GB IR GR DA NO FI IS
In case these symbols are not displayed on the unit, please refer to the technical documentation which will eventually
detail any modifications required to the installation of the unit in a particular country
All the technical and technological information contained in this manual, including any drawing and technical descriptions
provided by us, remain the property of Lennox and must not be used (except in operation of this product), reproduced, issued
to or made available to third parts without the prior written agreement of Lennox.
The technical information and specifications contained in this manual are for reference only. The manufacturer reserves the
right to modify these without warning and without obligation to modify equipment already sold
