Page 7
FIGURE 5
SETTING EQUIPMENT
HORIZONTAL APPLICATION
FRONT VIEW
AIR FLOW
END VIEW
UNIT
FRONT
1/2"
max.
Unit must be level side−to−side. Unit may be positioned from level to 1/2" toward the front to aid in draining.
FRONT VIEW
SIDE VIEW
1/2" max.
AIR FLOW
UNIT
FRONT
SIDE VIEW
UNIT
FRONT
UPFLOW APPLICATION
Side Return Air
(with transition and filter)
FIGURE 6
Return
Air
Plenum
Transition
20” X 25” X 1”
(508mmX635mmX25mm)
Air Filter
1
−
1/2”
SLP98UHV applications which include side return air
and a condensate trap installed on the same side of the
cabinet (trap can be installed remotely within 5 feet) re-
quire either a return air base or field−fabricated transi-
tion to accommodate an optional IAQ accessory taller
than 14.5". See figure 6.
Removing the Bottom Panel
Remove the two screws that secure the bottom cap to the
furnace. Pivot the bottom cap down to release the bottom
panel. Once the bottom panel has been removed, reinstall
the bottom cap. See figure 7.
Removing the Bottom Panel
FIGURE 7
Screw
Bottom Panel
Bottom Cap