IFU-0026
Lenire User Manual Version 2.0
Page
23
19.7 - I only received one Charger in the box, is that correct?
Yes. The same Charger may be used to charge the Controller and the Headphones.
See Chapter 10 for details.
19.8 - What should I do if I miss a treatment session?
To maximise the effectiveness of the treatment, it is important to adhere to the treatment regimen
prescribed by your clinician. If you miss a treatment session on any particular day, it is advisable
that you continue treatment as normal the following day.
19.9 - My Headphones won’t connect, even though the light on the Headphones indicates that
it is connected.
It is possible that another device, such as a mobile phone or a personal computer, is connecting
to your Headphones thereby preventing the Controller from connecting to them. Try either
•
Turning off any mobile phones, or other computer devices that are close by.
•
Moving to a different location, away from any computer devices.
If none of these steps fixes the problem, please contact Customer Support (see Section F).
Chapter 20 - Bluetooth Pairing / Un-Pairing
The Controller sends audio to the Headphones wirelessly using Bluetooth, and for this to work,
the Controller and the Headphones need to be ‘paired’, allowing the two devices to connect
automatically henceforth.
20.1 - Pairing Headphones to the Controller
The first time you try to use the Controller and Headphones together you may need to pair the
devices as follows:
•
Put the Headphones into Pairing Mode (see Lenire Headphone Handbook at
www.lenire.com/
product-support
for headphone specific details).
•
Switch on the Controller by pressing the Power Button for 2 seconds.
•
Place the Controller into Pairing Mode by pressing the Play, Pause and Buttons at the
same time. All indicator lights will flash blue for 2 seconds.
