12
Step 4:
The RS485 / OSDP communication wire is inserted correctly
into the connection hole of the RS232-RS485 converter.
NOTE: If the RS485 / OSDP communication wire can not be inserted
into the connection hole of the lower row of the converter after insert-
ing the wiring tool, then the wiring tool has not been inserted well and
needs to be taken out and re-inserted.
11
11
Step 3
: Every time the RS485 communication wire is inserted into the
RS232-RS485 converter, the wiring tool is inserted at a certain angle
without being taken out.
Insert at an angle
