21
Setting the reader in
programming mode
Authentication Card, part no: LNL-C5000-AC
In order to set the reader in programming mode, present the valid “Authentication Card”
to the reader as shown. The reader will beep and start blinking green to indicate that it
is now in programming mode.
The Reader is in programming mode for 10 seconds. If no other programming card
(valid Authentication Card, CHANGE Authentication Card, Configuration Card or OSDP
Installation Mode Card) is presented within this time, the reader will return to normal
mode. When a reader leaves programming mode it is indi cated by a blinking red LED
and a beep.
Note:
Authentication Cards can be programmed to a pre-initialized Authentication Card
using the Authentication Card Tool Software and a LenelS2 Readers - 5000 series
Reader connected to the Authentication Card Tool Software using a RS485 to USB
converter.
• Authentication Card Tool Software, part no. LNL-5000-ACT
• Reader tool software and connection cable set, part no. LNL-R50000-TOOL,
LNL-R50000-TOOL-UK or LNL-R50000-TOOL-US
• Pre-initialized Authentication Card, part no. LNL-C5000-PAC
17
1
: Set the reader in programming mode, see page: 15
2
: Present the “CHANGE Authentication Card” to the reader as shown. Keep the
card within reading distance un til the reader beeps and blinks in green. The reader
is now reprogrammed to only be set in programming mode by the new
“Authentication Card”. The old “Authentication Card” is no longer authorized to set
the reader in programming mode.
Note:
CHANGE Authentication Cards can be programmed to a pre-initialized
CHANGE Authentication Card using the Authentication Card Tool Software and
a Lenel Readers - 5000 series Reader connected to the Authentication Card Tool
Software using a RS485 to USB converter.
• Authentication Card Tool Software, part no. LNL-5000-ACT
• Reader tool software and connection cable set, part no. LNL-R50000-TOOL,
LNL-R50000-TOOL-UK or LNL-R50000-TOOL-US
• Pre-initialized CHANGE Authentication Card, part no. LNL-C5000-PCAC
Changing authentication card
Change Authentication Card, part no: LNL-C5000-PCAC
BEEP !
Reading distance
approximately 2 cm.
