Lencore G8350, Operation Manual

Page: 4 / 35

System: G8 350 i.Net Masking Only Rack Unit
- Class B wiring: MUTE MASKING IN, FAULT STATUS OUT
- At least one UPS and batteries should be used to provide secondary power supply for
emergency purposes and be installed in the same rack as the
G8350.
- The G8 350 should be installed in the following locations:
1) Within a key-locked cabinet or rack with physical security level 1 or higher
2) In a controlled access room with a minimum access control security level 1. Front-mounted
controls should only be changed by Authorized Personel.
- The system is provided with a Communication Security Level 0, which indicates no Security Level
employed.
- The following wiring connections are intended to be protected against mechanical damage.
IN between G8350 and Fire Alarm Control Panel or Notification Appliance Circuits
FAULT STATUS OUT between G8350 and Fire Alarm
Control Panel or Notification Appliance Circuits.
- The FACP and G8350 units need to be installed adjacent to each other.
- The system is not to be used in buildings providing Suppression Service (Systems using Halon, etc).
Sprinkled systems are allowed.
3 ) Use four 10-32 pan-head machine screws to mount the unit to the rack rails.