Installers Must Connect to the System with a Laptop to verify the Data
Cable (i.Net)
and to complete the Tune & Balance Ready Form
LENCORE'S BROWSER
BASED ACCESS AND TUNING
CAPABILITIES USING
SYSTEM
MANAGER
Although most installations do not require extensive changes or re-tuning, some clients prefer
the option of network controls that enable them to make systematic and/or spot changes to
the sound masking system. To enable the clients to do this, Lencore provides a private,
browser
based user interface with every
i
.Net
®
and Gold
TM
Ne
tworked Sound Masking
System called
S
ystem
Manager.
System
Manager is based on an open-architecture software platform that controls and
monitors the finished system. It can be accessed from any desktop or wireless computer with
an Internet browser.
The
System
Manager user-interface can be used to:
•
Tune the sound masking system for volume, contour & equalization
•
Create groups for masking zones, paging zones and music zones
•
Control volume and equalization for paging and music
•
Run diagnostics
•
Set and change group settings for each OP and each sound masking channel
•
Reset system to factory-set commands
•
Reset system to last saved settings
•
System
Manager interfaces with the sound masking system OP’s
•
The System Manager browser-based interface is built into the protocessor
(headend). In essence, the protocessor acts like a mini web server.
ACCESSING
SYSTEM
MANAGER FROM A
DESKTOP PC /
LAPTOP
24
Summary of Contents for G8350
Page 9: ...Wiring 4 ...
Page 20: ...Configuring The Time Settings 15 ...
