LENCO MC-250, User Manual

Page: 31 / 223

31
Select "Enable" to set it to off, Daily, Once, Weekends or Weekdays.
Select "Time", the hour digit will blink, turn the navigation knob on unit or press the |
button on remote control to set the desired hour, press the OK knob or the OK button to
confirm; the minute digit will blink, set the desired minute in the same way.
Select "Mode" to set the alarm mode to Buzz, Internet radio, DAB or FM.
Select "Preset" to set the alarm sounding by the last listened or the stored station in Internet
radio, DAB or FM page.
Select "Volume", turn the navigation knob on unit or press the or buttons on remote
control to set the desired volume.
Select "Save" after all settings, the alarm icon will appear at the bottom column of the screen,
use the same way to set the Alarm 2.
When the alarm sounds, press the | MODE button on unit or press the button on
remote control to stop sounding.
To cancel alarm completely, enter the alarm settings and set it OFF. The alarm icon will
disappear.
SYSTEM SETTINGS:
After Main menu setup is completed, enter system settings, the following page will appear.
1. In System settings menu, if Network is selected, the screen will appear as below.