- 43 -
USB and SD/MS/MMC Card Function
Preparation:
1. Connect the unit to the power supply.
2. Press the POWER to turn on the unit.
3. Press the SOURCE or DVD button to select
DVD mode.
4. Insert the USB memory into the unit’s USB
slot, or insert the SD/MS/MMC card into the
SD/MS/MMC card slot on the right side of the
unit. Please see the figure on the right:
Make sure that files are stored in the USB memory and SD/MS/MMC card before connection.
5. Press the CARD/AUDIO button to shift among disc playback, USB playback and SD/MS/MMC
playback. The default state is disk playback. Please see the below figure:
6. Press the
buttons to select the folder and press the ENTER button to enter.
7. Press the
buttons to select the desired track. Then press the PLAY
button to start
playback.
8. Press the STOP
button to stop playback.
Note:
1. The screen display will vary from disc to disc.
2. Pull out the USB memory or SD/MS/MMC card directly after the files are played. Then the unit
will be in the state of disc playback again.
3. BECAUSE
OF
THE
LARGE
DIVERSITY
OF
PRODUCTS
WITH
USB-,
SD-
AND
MMC-PORTS
AND
THE
SPECIFIC
MANUFACTURERSPECIFICATIONS
WE
CAN
NOT
GUARANTEE
THAT
ALL
DEVICES
WILL
BE
RECOGNIZED
OR
THAT
ALL
POSSIBLE
CONFIGURATIONS
WILL
FUNCTION
PROPERLY.
00
:
00 00:00
001/002
BAK
JPEG
