background image

 

- 8 -

 

Stereo Headphones/Earphones Jack 

A Stereo Headphones/earphones Jack has been provided on the front left lower part of the set so that you can 
listen  to  the  set  without  disturbing  others.  To  use  this  jack,  plug  in  low  impedance  stereo 
headphones/earphones (not included) and adjust the VOLUME Control for your listening pleasure. Special 
internal switches will turn off the set's speakers when you plug in the stereo headphones/earphones. 
To listen to built-in speakers, unplug the headphones/earphones. 
CAUTION: Long time listening through headphones/earphones at high volume may damage users  ears. 

 

                 

CARE AND MAINTENANCE            

                      

Compact Disc Care 

To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding 
it carefully by the edges.  
Fingerprints and dust should be carefully wiped off the disc s recorded surface with a soft cloth. Unlike 
conventional  records,  compact  discs  have  no  grooves  to  collect  dust  and  microscopic  debris,  so  gently 
wiping  with  a  soft  cloth  should  remove  most  particles.  Wipe  in  a  straight  line  from  the  inside  to  the 
outside  of  the  disc.  Small  dust  particles  and  light  stains  will  have  absolutely  no  effect  on  reproduction 
quality. 
Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to 
clean the disc. If necessary, use a CD cleaning kit. 
Never write on or affix labels to the surface of compact discs.  

Care of the cabinet 

If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish sprays on 
the cabinet. 
It the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth slightly 
dampened with a mild soap and water solution. Never use abrasive cloths or polishes as these will mar 
the finish of your unit. 

Caution 
Never allow any water or other liquids to get inside the unit while cleaning.  

SPECIFICATIONS 

CD SECTION 
Channels:          

2 channels 

Optical pick-up:        

3 beams laser 

Frequency Response:   

100Hz - 16K Hz 

RADIO SECTION 
Receiving Band:         

FM 

Tuning Range:         

FM   87.5   108 MHz 

GENERAL 
Output Power:    

2 x 1.2 W 

Phones jack:     

3.5mm 

Power Source:    

AC 230V ~ 50 Hz           

DC 9V(006P)-FOR CLOCK BACKUP 

Weight     

Approx.

 

1.5 kg 

Dimensions     

Approx.210mm (L) x 215mm (W) x 105mm(H) 

Power Consumption:   

16W   

Note: Specifications are subject to change for continuous improvement without prior notice. 

  

If at any time in the future you should need to dispose of this product please note that 
Waste  electrical  products  should  not  be  disposed  of  with  household  waste.  Please 
recycle where facilities exist. Check with your Local Authority or retailer for recycling 
advice. (Waste Electrical and Electronic Equipment Directive).

 

Summary of Contents for CR-2800










Reviews: