LENCO CR-2800 Instruction Manual Download Page 7

 

- 6 -

 

6) To  pause  briefly  during  playback  press  the  CD  PLAY/PAUSE  button.  The  track  number  being  played 

flashes. The sound stops, but the disc continues to spin. Press CD PLAY/PAUSE button again to cancel 
pause and resume playback. 

7) To  skip  forward  or  backward  to  other  tracks  repeatedly  press  the  F.REV  or  F.FWD  button  until  the 

desired track number appears in the display. Playback will begin on the selected track. 

8) To  stop  playback  at  any  time  press  the  STOP  button.  After  the  last  track  has  played  the  disc  stops 

automatically. Press the OPEN/CLOSE button to open the CD door and remove your disc. 

Important Note
You  cannot  stop  CD  playback  by  pressing  the  ALARM  OFF/POWER  button.  You  must  press  the  CD 
STOP button to stop CD playback first, and then you can press the ALARM OFF/POWER button to shut 
the power off.  

To Start Playback From A Specific Track 
Load  your  disc  and  wait  until  the  display  shows  the  total  number  of  tracks.  Press  the  F.REV  or  F.FWD 
button  to  select  the  desired  track.  While  the  track  number  is  still  appearing  press  the  CD  PLAY/PAUSE 
button. Playback will begin on the selected track and continue until the end of the disc.  

High Speed Music Search 
You can search rapidly forward or backward within a track to locate a specific musical passage. 
Depress and hold the F.REV or F.FWD button to begin high speed search. The display will show the current 
track and the player moves rapidly forward or backward. When you reach the desired passage release the 
F.REV or F.FWD button and normal playback resumes. 
NOTE: The volume level is automatically reduced during high speed music search.  

To Select A Specific Album(Folder) ( if the MP3 disc or USB/SD/MMC contains more than one album) 

Press and hold the DISPLAY/ALBUM+ button in stop or during playback until the desired album number 
appears  on  the  display,  then  release,  press  the  PLAY/PAUSE  button  to  play  the  tracks  under  the  selected 
album.  

To Select A Song Which Track Number Exceeds 10 (for MP3 only) 
To  select  a  song/track  which  number  exceeds  10  during  playback,  press  and  HOLD  the 

            

CLK.ADJ/PROG./P-MODE/FILE  +10  button  for  skip  forward  at  10  tracks

release  the  button  when 

desired track is searched.   

Repeat Play 
You can play one track or all tracks or the whole folder( for MP3 only) on the disc repeatedly. 
To Repeat a Single Track 
1.  Press the CLK.ADJ/PROG./P-MODE/FILE +10 button once in play, the REPEAT indicator turns on 

red. The current track will be played over and over again till you press the STOP button. 

2.  To  cancel  repeat  play,  press  the  CLK.ADJ/PROG./P-MODE/FILE  +10  button  until  the  REPEAT 

indicator turns off. 

To repeat all the Tracks 
1.  Press the CLK.ADJ/PROG./P-MODE/FILE +10 button twice in play, the REPEAT indicator turns on 

green, all tracks on the disc will be played over and over again till you press the STOP button.  

2.  To  cancel  repeat  play,  press  the  CLK.ADJ/PROG./P-MODE/FILE  +10  button  until  the  REPEAT 

indicator turns off. 

To Repeat The Folder(Album) ( Only For MP3 Which Contains More Than One Folder) 
1.  Press  the  CLK.ADJ/PROG./P-MODE/FILE  +10  button  three  times  in  play,  the  REPEAT  indicator 

turns on yellow. The whole folder will be played over and over again till you press the STOP button. 

2.  To  cancel  repeat  play,  press  the  CLK.ADJ/PROG./P-MODE/FILE  +10  button  until  the  REPEAT 

indicator turns off.  

Random Play 
Press  the  CLK.ADJ/PROG./P-MODE/FILE  +10  button  four  times  during  playback,  the  RANDOM 
indicator turns on, the player starts play tracks in random order until all tracks are played over and then stop. 
Press the CLK.ADJ/PROG./P-MODE/FILE +10 button until the RANDOM indicator turns off to cancel. 

Summary of Contents for CR-2800










Reviews: