Preparation of the Tractor
40
6.6 Three-point
linkage
DANGER
Danger to life if three-point linkage category is too small
If a drawbar or a top link pin is used with a category that is too
small, these components may be overloaded and break. As a re-
sult, the implement may fall down and injure or kill people in the
immediate vicinity.
As a result, the implement may be damaged.
As a result, other road users may be injured or killed while the
implement is being transported.
Only use drawbars and top link pins that comply with a category
corresponding to the tractor's output in accordance with ISO
730-1.
WARNING
Loss of the implement
The tractor's three-point linkage category and the category of the
drawbar and top link pin must match. Otherwise, the drawbar and
the top link pin may slip out of the linkage when driving over une-
ven ground or due to vibrations.
Always ensure that the three-point linkage category exactly
matches the diameter of the drawbar and the top link pins.
Summary of Contents for Rubin 9 U + K U
Page 2: ......
