Adjustments
62
10.5
Working depth of the edge discs
DANGER
Loss of components
If the guide pins are not secured, they can fall out due to vibra-
tions in operation. This can result in components being lost during
operation and transportation and can cause accidents or damage
to the device and the tractor.
The guide pins must always be secured.
WARNING
Risk of injury due to removed shear bolt
If the shear bolt is removed, the tine can pivot freely. This can
lead to crushing of the fingers around the tine carrier.
Mount the removed shear bolts without delay.
The edge discs (1) are adjusted with the
guide pins (2) as follows:
Release the guide pin (2).
Slide the disc carrier (3) slightly upwards
to relieve the load on the guide pin (2).
Pull the guide pin (2) out.
Push the disc carrier (3) into the required
position.
Re-insert the guide pin (2).
Secure the guide pin (2).
2
1
3
