Switching over to different share systems
81
11.3.1 Removing the share base
When the implement has been lifted out, it must be secured with
the aid of a suitable support to prevent it from unintentionally
dropping.
Switch the tractor's three-point linkage
hydraulic system to position control.
Raise the implement all the way.
Secure the implement with a support to
prevent it from unintentionally dropping.
Lock the tractor's control units.
Switch the tractor engine off.
Using the hook wrench (4), swivel the
retaining wire (5) of the linch pin (3)
backwards.
Hold the share base (2) in the detent po-
sition by pressing the guide plate (6) up
against the tine (1).
Remove the linch pin (3) by pulling it
upwards.
Hold the share base (2) with both hands
and swivel the share base (2) forwards
to detach it from the tine (1).
Pull the share base (2) downwards and
deposit it outside the implement.
11.3.2
4
2
4
3
1
5
2
1
6