8
TWIN
MIC
1
PAN
MON
HIGH
LOW
GAIN
ì
L
0
0
0
10
-
15
-
15
-
15
R
L
15
0
10
0
10
0
10
4
4
0
0
1
10
-
20
-
15
-
45
-
15
15
-
15
ì
P
E
A
K
REV
AUX1
MON
MULTI
AUX2
LINE
MONO input channel
a) INPUT section
Each channel has two different connectors on the rear panel: a JACK for
connecting instruments and equipment with line signals and an XLR for
connecting microphones.
MIC INPUT
Balanced XLR connector (from -15dB to -45dB /1k
W
):
receives the
microphone input signal on the channel. This input is for use with
microphones, but can also accept a wide range of balanced or unbalanced
low impedance signals.
Do not connect keyboards, recorders or other equipment with a line signal,
as the signal level would be too high and probably distorted.
LINE INPUT
Balanced JACK connector (from +10dB to -20dB /10k
W
):
receives the
line input signal on the channel. This input can receive balanced or
unbalanced high-impedance signals from equipment with a high-level
output (all instruments excluding microphones).
Do not connect a microphone to this input: the signal would not be sufficiently
amplified and will probably be poor and disturbed.
GAIN
Gain control:
regulates the amplification of external signals (microphones,
instruments, etc.) fed into the channel. Has two sensitivities:
LINE
(high level signals connected to the JACK connector)
é
Regulation is continuous from +10dB (minimum gain) to -20dB (maximum
gain);
MIC
(microphones connected to the XLR connector)
é
Regulation is
continuous from -15dB (minimum gain) to -45dB (maximum gain).Used
along with the luminous channel indicator, which enables input signal peak
level to be monitored, GAIN enables to achieve a present sound and
avoid signal distortion.
Remember that regulation varies according to the type of microphone and type
of sound source (male or female voice, instrument, etc.), as well as its distance
from and position relative to the microphone. So regulate the GAIN according
to your mixing needs, checking the level with the channel LED, which enables
the input signal level to be monitored, and helping your regulation by listening to the results.
Summary of Contents for TWIN SERIES
