LELY COSMIX P, Installation And Operator'S Manual

Page: 93 / 114

5.2308.8512.0
B
TEST AND ADJUSTMENT 7-3
7.4 Make Basic Software Settings
7.4.1 Display the Software version
Block the cow traffic to the concentrate feeder before you do
this procedure.
Use the E-Link manual controller for this procedure.
1. In the main menu, select ‘ Version number ’ and push button [ ] .
2. Push button [ ]. After a few seconds you return to the main menu.
7.4.2 Reset to the Default Settings
Block the cow traffic to the concentrate feeder before you do
this procedure.
Use the E-Link manual controller for this procedure.
1. In the main menu of the E-Link, select ‘ Settings ’ and push button [
].
2. Select ‘ Set defaults ’ and push button [ ].
3. Push soft button [OK] to confirm. After a few seconds you return to
the main menu.
7.4.3 Set the Time
Block the cow traffic to the concentrate feeder before you do
this procedure.
Use the E-Link manual controller for this procedure.
1. In the main menu of the E-Link, select ‘ Settings ’ and push button [
].
2. Select ‘ Time ’ and push button [ ].
3. Use soft buttons [<] or [>] to select the position you want to change.
4. Use buttons [ ] or [ ] to change the value.
5. Push soft button [OK] to confirm. After a few seconds you return to
the menu ‘ Settings ’ .
7.4.4 Make the Photocell Active
Block the cow traffic to the concentrate feeder before you do
this procedure.
Only applicable for Qwes IR readers.
innovators in agriculture