Pag. 4
English
COMPONENTS PL67:
1.
Beans bowl
2.
Locking pin of the grinding ring nut
3.
Grinding switch
4.
Supporting elements for the right positioning of the filter holder
USER INSTRUCTIONS
:
Before using the machine please check:
•
that the voltage corresponds to the voltage required as stated on the technical data label, on
the bottom of the machine.
•
that the main switch is off and that the machine has been plugged in.
•
that the beans bowl (1) contains coffee beans.
Starting the machine:
1.
Press the locking pin (2) of the grinding ring nut and, in order to regulate the grinding, rotate
the grinding ring nut clockwise to obtain a fine grinding, anti-clockwise to obtain a gross
grinding.
2.
Stop rotating it once you found the desired grinding degree.
3.
Press the grinding switch (3) with the filter holder in order to start the grinding and obtain the
freshly ground directly in the filter holder.
4.
Once you obtained enough ground coffee, remove the filter holder so the grinder will stop
grinding.
ROUTINE MAINTANCE AND PRECAUTIONS:
-
The grinding degree is the most important thing in order to obtain a creamy coffee. This
degree changes according to the coffee blend.
-
Please replace, once worn out, the mills.
-
In order to change the mills, please contact an authorised service centre.
-
Do not put the machine under water.
-
Do no put any parts of the grinder in the dishwasher. Just use neutral soap and water to wash
the bean bowl.
TECHNICAL DATA:
Voltage:
220/240 V ≈ 50 Hz ▪ 110/120 V ≈ 60 Hz
Power:
100 W
Weight:
6 kg
Bowl capacity: 250 gr
