Step 8
With the handlebar stem in a stable
position, it is now time to re-attach
the handlebar. For this, use the
4
mm allen key
to remove the four
bolts on the front plate of the stem
(see step 1). Check if the
handlebar has the desired angle,
then attach the handlebar and
tighten those bolts to 5Nm.
Step 9
It is finally time to set your desired angle
for the handlebar stem. On the picture to
the right you can see the scale ranging
from 0 to 60 degrees. In order to adjust
the angle, loosen the bolt to the right of
the scale using a
5 mm allen key
.
