LEITZ wireBIND 500e, Operating Instructions Manual

Page: 7 / 124

8
Specifications
Operating method Electrical
Paper size A5, A4, US letter
Punching dies 23 (2:1 pitch), 34 (3:1 pitch)
Punching capacity 25 sheets (80 g/m paper) or 2 transparent 0.2-mm films
Plastic comb size 6–28 mm (up to 250 sheets)
Power requirements 220–240 V AC, 50 Hz
Power consumption 400 W
Net weight 21 kg
Dimensions (W x D x H) 450 mm x 550 mm x 170 mm
Subject to technical changes without prior notice.
Troubleshooting
Problem Remedy
You hear an alarm sound
from the unit.
Empty the cuttings tray immediately to prevent damage to the motor and punching
mechanism.
No response when
pressing the punching
button. Check whether:
the cuttings tray is full.
the unit is properly connected to a live mains socket and switched on .
the fuse is blown. If yes, go to next step.
•
•
•
The fuse is blown.
Replace fuse with same type and rating. If new fuse blows again, have the unit repaired
by the manufacturer. Never attempt to operate the unit with a fuse other than specified.
Maintenance and care
To prevent damage to the motor and punching mechanism, empty the cuttings tray regularly.
In case of defects: Do not attempt to repair the unit yourself. Contact the manufacturer for any required repairs.
Read guarantee declaration for further information.
To clean the housing, unplug the unit and wipe the outside with a damp cloth. Do not use any chemicals for cleaning.
•
•
•