WARNING.
1. Read these instructions before using this appliance.
2. Use an approved regulator which is adjusted to the gas supply pressure required,
(NOT supplied).
3. Do not keep pressing the ignition button for more than 40 seconds.
4. Never disconnect the regulator while container valve is open.
5. Do not change gas cylinder in any areas which contain an open flame.
6. Do not expose your container to extreme heat.
7. Do not locate any other container within the space which the heater is used.
8. Do not insert your finger or any other material through the front panel of the heater.
9. Leave at least 1 metre distance between your heater and any other heat source.
10. Do not let unauthorized persons interfere with your heater.
11. Do not place appliance under socket outlet.
12. Don't use the heater in basements, bathrooms or bedrooms.
13. This heater must not be used without a gas container fitted for stability purposes.
14. Do not cover your heater.
15. Fabrics, clothing, hangings, net curtains, bed linens and other flammable materials may
ignite if placed against the outlets of your heater.
16. In the event of a leak, the appliance valve should be turned off and the regulator
disconnected from the container.
17. After use, turn off the appliance at the gas valve.
18. Only use in a well ventilated area.
STORAGE
1. Disconnect container.
2. Store container in a well-ventilated area away from combustible material. Storage should
preferably be in an outhouse but must not be in a basement or high-rise flat.
3. The heater should be covered in a dry, dust-free sheet or in its original packaging.
CLEANING
1. Use a damp cloth (not wet) with a solution of soapy water to clean the exterior and
container storage area of your heater.
2. Make sure that no water gets onto the burners or pilot/light area. Wipe the heater
completely dry before use.
3. Do not use abrasive cleaners as they may damage the quality paint finish.
MAINTENANCE
1. Check flexible tube between regulator and heater before every operation and replace it if
perished, worn or damaged. In any case consider its expiration date to replace the tube
2. It is recommended that the heater is maintained each year by authorized personnel.
