Leister WELDPLAST 200-i, Operating Instructions Manual

Page: 13 / 20

13
Plasticizing unit, voltage V~
230
Plasticizing unit, power W 600 800
Plasticizing unit, frequency Hz 50 / 60
Servo drive (Beckhoff), voltage V~ 3 × 400 3 × 400
Servo drive (Beckhoff), power W
1380 2570
Servo drive (Beckhoff)
Max. speed
(gear input speed)
rpm 6000 5000
Servo drive (Beckhoff), gear 1:10
Welding rod
ø mm
ø inch
ø 3, ø 4
ø 0.12, ø 0.16
ø 4, ø 5
ø 0.16, ø 0.2
Output PE/PP wire ø 3
kg/h
lbs/hr
1.4 (@ 600 rpm screw)
3.09 (@ 600 rpm screw)
--
Output PE/PP wire ø 4
kg/h
lbs/hr
2 (@ 600 rpm screw)
4.4 (@ 600 rpm screw)
4 (@ 500 rpm screw)
8.82 (@ 500 rpm screw)
Output PE/PP wire ø 5
kg/h
lbs/hr
--
6 (@ 500 rpm screw)
13.23 (@ 500 rpm screw)
Max. acceleration, all axes
m/s²
ft/s²
< 1
< 3.28
Plastics to be processed
PE, PP, PVC-U, PVC-C,
PVDF, PA 6, PC, ABS, PEF,
PUR, ECTFE
PE, PP
Weight of complete device
Incl. servo motor, gear
I/O modules, air and plastic heaters
kg
lbs
Approx. 15
Approx. 33.07
Approx. 22
Approx. 48.5
Dimensions L × W × H
(without welding shoe)
mm
inch
660 × 191 × 210
25.98 × 7.52 × 8.27
876 × 191 × 210
34.49 × 7.52 × 8.27
Protection class I
WELDPLAST 200-i WELDPLAST 600-i
Hot air LHS 21 S/L, voltage V~ 230
Hot air LHS 21 S/L, power W 2000 3300
Hot air LHS 21 S/L, frequency Hz 50 / 60
Max. air temperature
°C
°F
350
662
Max. plast. temperature
°C
°F
260
500
Hot air volume @ 2 bar
l/min
cfm
498 (measurement with cold air)
17.6 (measurement with cold air)
Compressed air for hot air bar
2 bar (push-fit compressed air connection hose ø 10)
Wire intake compressed air cooling bar 2 bar (push-fit compressed air connection hose ø 6)
Industrial extruder for extruding (welding, 3D printing) thermoplastic materials in the fields of tank construction,
apparatus engineering, pipeline construction, and landfill construction. Electrically conductive materials (e.g., PE-EL)
must not be welded.
Use only original Leister spare parts and accessories; otherwise, any warranty or guarantee claims will not be valid.
Any other use or any use beyond the type of use described is deemed non-intended use.
Subject to change without prior notice.
Supplementary documents:
• Installation drawings
• CAD/3D data
• Suggested component list
• Suggested electrical diagram Available at www.leister.com
1.1 Intended use
1.2 Non-intended use
2. Technical data