60
Drive
The LED on the
Drive "On/Off" key (37)
displays the condition of the drive.
Heating and drive
If the two LEDs for the
Heating "On/Off" (38) key
and the
Drive "On/Off" (37) key
flash simultaneously, an
error is pending (see Chapter Error messages).
• Hold down the
Drive "On/Off" (37)
and
Heating "On/Off" (38)
keys and switch on the
device using the
main switch (20)
. "UNIT" then appears on the display.
• Press the
Confirm key (40)
to confirm and set the desired units using the
Plus/Minus
keys (39/41)
.
• Press the
Confirm key (40)
to confirm and use the
Plus key (41)
to select "SAVE".
Press the
Confirm key (40)
to confirm; the units are then saved.
The device then restarts automatically.
The units for the welding speed and for the temperature can be adjusted.
Temperature: °C or °F
Speed:
m
min
or
ft.
min
The TWINNY T5 has a key lock. It blocks the five keys on the control panel. The key lock is activated or deactivat-
ed by pressing the
Minus (39)
and
Plus (41)
keys for at least 3 seconds. When the key lock is activated, this is
indicated at the top left of the display.
9.3 Setting the parameter units
9.4 Key lock
LED status
Drive On/Off (37)
Condition
LED off
Drive is switched off
LED continuously green
Drive is switched on
