50
Under General Info you will find version information regarding the software in addition to
information regarding the date of production.
Use the
"e-Drive" (27)
to access the Setup menu and confirm your selection. Use the
"e-Drive" (27)
to set the Advanced Mode to On and then select General Info.
Use the
"e-Drive" (27)
to access the Setup menu and confirm your selection. Now use the
"e-Drive" (27)
to set
the Advanced Mode to On and then select Machine Setup.
If you wish to have an overview of relevant information, e.g., line voltage, capacity utilization
of the heating, select the Setup menu and confirm your selection. Now activate the Applica-
tion Mode.
Warnings are displayed on a case-by-case basis in the
status display (31)
. If there is a
warning pending, you can still continue to work largely without restrictions. The Warnings
menu indicates the type of malfunction. Once the malfunction has been rectified, the entry
disappears.
Use the
"e-Drive" (27)
to access the Setup menu and confirm your selection. Use the
"e-Drive" (27)
to set the Advanced Mode to On and then select Warnings.
All available information (symbol i) is now displayed in the
working display (29)
(see
Display symbols of the working display). The information field is always displayed below the
field for the air volume.
Unit:
Setting the unit system (metric or imperial) for Unit Speed, Unit Heat, and Unit Force
Unit Speed:
Individually setting the unit used for speed (metric/imperial)
Unit Heat:
Individually setting the unit used for heat (metric/imperial)
Unit Force
: Individually setting the unit used for force (metric/imperial)
LCD Contrast:
Adjusting the LCD display contrast
LCD Backlight:
Adjusting the LCD display background illumination
Key Backlight:
Adjusting the keyboard background illumination for the
control panel (3)
6.7 Duty Info
6.8 Warnings
6.9 Machine Setup
6.10 Showing current values (Application Mode)
