49
If the engine is switched off, the heating is activated, and if no key is activated during
the time defined under Standby interval, then the device will switch over automatically
to the Standby display. If the
"e-Drive" (27)
is not pressed during the subsequent 180
seconds, then the heating will automatically switch to Cool down mode. Standby will then
appear on the display. Pressing
"e-Drive" (27)
causes the device to switch to Working
mode.
Standby mode is not activated when the devices are shipped.
The desired time interval can be defined individually by selecting the Standby menu with
the
"e-Drive" (27)
and then setting the desired value with the
"e-Drive" (27)
.
6.4 Standby
In the Basic setting, move through the Setup menu to save the profile, to Standby func-
tion, Application Mode, and Advanced Mode.
Additional information and setting options are available in Advanced Mode.
The functions listed in Chapters "Duty Info" to "Reset to defaults" are only available in Advanced Mode.
6.5 Basic setting and Advanced Mode
Under Duty Info you will find information regarding the runtime of your TWINNY T7.
Use the
"e-Drive" (27)
to access the Setup menu and confirm your selection. Now use the
"e-Drive" (27)
to set
the Advanced Mode to On and then select Duty Info.
Hours Drive:
Current runtime of the drive
Hours Blower:
Current runtime of the blower
Hours Machine:
Current runtime of the machine
Day Distance:
Distance covered since last reset (must be reset manually)
Total Distance:
Distance covered since commissioning of the device
6.6 Duty Info
