Leister TAPEMAT, Operating Instructions Manual

Page: 16 / 56

16
B efore putting into operation, check the mains connection cable (1)
and the plug for electrical and mechanical damage.
• Fit the guiding handle (16/17) .
• Hook mains connection cable (1) into retainer (20) .
• Adjust the guiding handle to the desired height using the clamping lever (19) .
• Insert the strap unrolling device (32) into the locator (34) .
• Check the default setting of the welding nozzle (8) .
– The welding nozzle (8) must be aligned and set parallel and centrically to
the drive roller/pressure roller (12) .
– The distance to the tarpaulin must be approx. 4 mm.
• Carry out the adjustment of the welding nozzle (8) :
– Height with adjustment screw (13)
– Vertical with adjustment nut (14)
– Other settings with adjustment screws (15) .
• Check the guide roller (21)
– the guide roller (21) must be aligned centrally to the
Drive roller / Pressure roller (12) .
Readiness for operation
16
19
4 mm
17
12
8
21
12
1
20
18
14
13 15
32
34
Adjusting the TAPEMAT welding nozzle
Welding nozzles
Welding nozzle TAPEMAT
50 mm width
Welding nozzle TAPEMAT«Spriegel»
100 mm oder 125 mm width
Trapaulins
Straps 50 mm Weld seam
50 mm
Plane
PVC-Spriegel 100 oder 125 mm
Weld seam
20 mm
Weld seam
20 mm