Axetris AG
LGD Compact Operating & Integration Instructions; Rev. D
7/46
CAUTION
Product damage
Read all instructions carefully before using the device.
The LGD Compact gas sensor modules are not designed to sense liquid flow and damage will result if
liquid is passed through the sensor.
Gas loaded with particles will eventually contaminate the optics and affect the performance of the
sensor. Please consult our TCS (Technical Customer Support) accordingly.
The appliance must not be used in damp or moist surroundings.
Only use accessories indicated in the instructions for use or which are recommended by
the
manufacturer.
Failure to comply with these instructions can result in product damage.
Danger to life
Unprofessional gas handling can cause injury or death. The use of the gas sensor modules should only
be performed by qualified personnel.
Do not use this product as a safety or emergency stop device or in any other application where failure
of the product could result in personal injury or death.
IF THE TEMPERATURE OF THE GAS PROVIDED IS HIGHER THAN THE CELL, A HIGH RISK OF
CONDENSATION AND IRREVERSIBLE DAMAGE OF THE CELL EXISTS.
DO NOT OPEN THE LGD COMPACT MEASUREMENT HEAD: LASER CLASS 1 INSIDE
(Peak Power 2.5 mW - Wavelength: 1500 - 2000 nm).
DO NOT USE THE SYSTEM IN AN EXPLOSIVE ATMOSPHERE: NOT ATEX CERTIFIED.
DO NOT USE WITH EXPLOSIVE GAS MATRIX: NOT ATEX CERTIFIED.
CLASS 1 LASER PRODUCT
(classified according to SN EN 60825:1:2014-08)
