analogue solutions
Leipzig
e&oe (c) 1-11-08
9
MIXER
The mixer is used to bring various audio source signals together
for filtering. There are four mixer controls. In all cases, centre is
zero volume, or turn to the left or right to select either of two sound
sources.
NOISE/EXT1 level
Turning the control anti-clockwise in increasing amounts sends
the signal (if any) coming in off the rear panel EXT1 socket to the
mixer.
Turning the control clockwise in increasing amounts sends
white Noise to the mixer.
In a central position no signal is sent to the mixer.
-1/-2 SUB level
SUB is a duplication of the VCO square wave output, but at a
lower octave. Use to beef up the sound.
Turning the control clockwise in increasing amounts sends a -2 octave VCO2 square
wave signal to the mixer.
Turning the control anti-clockwise in increasing amounts sends a -1 octave VCO2
square wave signal to the mixer.
In a central position no signal is sent to the mixer.
Saw/Pulse VCO1 level
Turning the control clockwise in increasing amounts sends VCO1s pulse signal to
the mixer.
Turning the control anti-clockwise in increasing amounts sends VCO1s sawtooth
wave signal to the mixer.
In a central position no signal is sent to the mixer.
Saw/Pulse VCO2 level
Turning the control clockwise in increasing amounts sends VCO2s pulse wave signal
to the mixer.
Turning the control anti-clockwise in increasing amounts sends VCO2s sawtooth
