analogue solutions
Leipzig
e&oe (c) 1-11-08
22
MIDI DATA EDITING
The keyboard / MIID setup can be edited using the butttons and LCD. All the param-
eters are self-explanatory, but details are here.
PAGE, PARAM -10, -U, +10, +U
There are six pages of parameters. Each page contains two sets of parameters.
To scroll through the 6 pages, and also enter the STORE page, press the PAGE but-
ton. Think of this as a Y setting in an X/Y data table.
To move the cursor between the 2 sets of data in each page, press the PARAM button
(paramater). Think of this as an X setting in an X/Y data table.
So using the PAGE and PARAM buttons you can easily step through the param-
eters.
To alter a parameter's value, furst select the parameter, ensuring the cursor is under
the appropriate parameter, then use the +/- buttons to edit the value.
There are four +/- buttons;
-U decreases data by 1
+U increases data by 1
-10 decreases data by 10
+10 increases data by 10
The U inplies Units; to edit the units +/-.
OCT-, OCT+
You can quickly alter the keyboard octave s/- four values. Octave setting can
also be edited via the LCD. The octave paramter/buttons are used to transpose the key-
board in whole octaves.
Transpose and Octave parameters only affect the keyboard data. That is the note
information sent to the voice circuits and the data sent to the MIDI Out socket. These pa-
rameters will not affect MIDI information received at the MIDI In socket.
STORING PARAMETERS
The new value of any parameter you edit will be lost if you switch off the machine. So
ensure you store the setup before switching off.
Press the PAGE button until you get to the store page. Then Press OCT+ to store the
setup. Then the LCD will revert back to PAGE0.
If you do not wish to store, then just press PAGE again to return to PAGE0
