MP3 PLAYER
The MP3 function is activated by inserting a memory card. To switch between
songs short press the forward or backward buttons. Adjust volume by long pressing
the forward and backward buttons. Please keep in mind that Bluetooth is not
available while a memory card is inserted.
RADIO
Before using the radio function, connect the charging cable to the speaker. The
speaker must be switched
off
and the other end of the cable must not be
connected to anything! It will work as antenna. Activate radio function by pressing
Play/Pause until you hear a signal. Station scanning will be activated by short
pressing Play/Pause while in radio mode. The scan is finished when the channels
stop changing automatically. To change the channel short press forward or
backward. Adjust volume by long pressing the forward and backward buttons.
To switch back to Bluetooth mode keep Play/Pause button pressed.
HANDS-FREE FUNCTION
Receive and finish incoming calls by short pressing the MFB. The integrated
microphone will be activated automatically.
CHARGING THE INTEGRATED BATTERY
When the battery is low (about 10 minutes run time left) the speaker alerts
acoustically. In this case, charge the speaker as soon as possible. Use a 5V 1A
USB power supply to charge. Higher voltage may damage speaker and power
supply. The red indicator light will stay on when the speaker is charging. Once it
has finished charging, the indicator light will go out.
