Others
- 186 -
• It is possible that the subject may appear slightly
distorted, or the subject edges display color
fringes, depending on the zoom magnification, due to the characteristics of the lens. Also, the
peripherals of the image might look distorted because the perspective is enhanced when the
wide angle is used. This is not a malfunction.
• This phenomenon appears when you press the shutter release button halfway to set the
aperture value and does not affect the recorded pictures.
• This phenomenon also appears when the brightness changes when the camera is zoomed or
when the camera is moved. This is because of operation of the automatic aperture of the
camera, and it is not a malfunction.
• The monitor may flicker for a few seconds after the power is switched on. This is an operation
to correct flicker caused by lighting such as fluorescent lights, LED lights etc. and is not a
malfunction.
• Check [LCD MODE] setting.
(P53)
• Perform [LCD Display]/[VIEWFINDER].
(P52)
• Does the picture appear on the Viewfinder?
>
Press [EVF/LCD] button to switch to monitor display.
• This is not a malfunction.
These pixels do not affect the recorded pictures.
• In dark places, noise may appear to maintain the brightness of the monitor. This does not affect
the pictures you are recording.
Lens
The recorded image may appear distorted, or subjects are surrounded by a color
fringe.
Monitor/Viewfinder
The monitor/Viewfinder becomes darker or brighter for a moment.
The monitor flickers indoors.
The monitor/Viewfinder is too bright or dark.
The picture is not displayed on the monitor.
Black, red, blue and green dots appear on the monitor.
Noise appears on the monitor.
Summary of Contents for V-Lux 3
Page 1: ...LEICA V LUX 3 Instructions...
