TS12P, Operation
40
4.5
Autodetect Behaviour
Description
• The instrument incorporates an autodetect behaviour and automatically detects
the following device:
• RadioHandle
• Whenever a device is attached, the instrument responds with two short beeps.
• Whenever a device is removed, the instrument responds with one long beep.
RadioHandle
• RadioHandle is automatically detected by the instrument when it is attached.
• When RadioHandle is attached, the appropriate port and device settings have to be
set manually in the
CONFIGURE Interfaces
menu.
4.6
Instrument Setup for Remote Control
4.6.1
Remote Control Setup
Setup
step by step
Step
Description
Refer to "4.1 Instrument Setup" for the initial instrument setup onto a
tripod. Remove the instrument carry handle by simultaneously pressing and
holding-in the four push buttons.
1.
Place the RadioHandle onto the instrument by simultaneously pressing and
holding-in the four push buttons.
Ensure that the interface connection on the underside of the RadioHandle
is on the same side as the Communication side cover.
2.
Swing the RadioHandle antenna into an upright position.
Refer to "CS15 User Manual" for additional information.
2
2
2
3
4
1
TPS12_196
