6
Operation
Rugby 400 DG 1.1.0en
Operation
Entering Grade
Direct Grade Entry
Grade Entry by Digit
Grade Zero
The grade in either axis can quickly be
set to zero by pressing both the Up
and Down buttons simultaneously
while in either grade entry mode.
When changing grade using the direct
entry method, the counter will always
stop at zero. Release the button and
press again to continue counting
beyond zero.
Grade Capability
The Rugby 400DG can have up to
15% grade simultaneously in both
axes, or up to 25% in one axis.
Grades above 15% in one axis require
that the cross axis grade be ±1% or
lower. In this situation, if attempting to
enter grades greater than 1% or 15%,
a notice will appear on the screen
when the button is pressed.
)
If no button is pressed, the
display will revert to the main display
after ten seconds.
Press
POWER
to turn the
Rugby on.
Press
X/Y
once to enter X-
axis grade. Press
X/Y
again to
enter Y-axis grade.The
display will show the grade
entry screens.
Use the
UP
or
DOWN
buttons
to set the desired grade.
Press
X/Y
to exit.
While in the grade entry
screens, press the
STAR
button and a cursor will
appear on the +/- sign.
Press the
STAR
button to
move the cursor to the right.
Press the
UP
or
DOWN
buttons to change the sign or
the digit that is highlighted.
Press
X/Y
to exit.