14
Setup
Rugby 400 DG 1.1.0en
Additional Setup Options
Additional setup options may be
accessed in a second setup screen.
Changing the Setup Options:
When entering the setup screen, the
EXIT window be highlighted.
To change the setup options in this
window the buttons are used in the
following way:
Press the STAR button and the cursor
will become a thick border around the
selected parameter. Once selected,
use the UP and DOWN buttons to
change the parameter.
)
If no button is pressed, the
display will revert to the main display
after ten seconds.
+
From the main
operating screen,
Press and hold the
UP
button, then press the
STAR
button to access
the second level setup
screen.
Selects beam masking
at the diagonals or at the
corners.
Allows the Rugby to
always start up with no
beam masking, or to
save and start up with
the last beam mask
setting used.
Allows the Rugby to start
up with the H.I. Alert
automatically turned on,
or turned off.
Allows the operator to
disable the negative
grade function of the
Rugby. When disabled,
negative grade cannot
be entered in the grade
displays.
The remote control is
enabled only when a
remote is to be used with
the Rugby. It is normally
off to conserve battery
power.
The STAR button is used to
select or deselect the setup
parameters.
The UP and DOWN buttons
are used to move the cursor
and change the parameters.
Select the EXIT window, then
press the STAR button to exit
and return to the main display.
