18
Accessories
Rugby 400 DG 1.1.0en
The Sighting Scope
A sighting scope (739870)
is
available as an optional accessory for
alignment of the axes and second day
setups.
The scope is magnetically mounted to
the top of the housing and once
aligned has a repeatable accuracy of
approximately ± 0.2°.
Alignment of the crosshairs
If using the scope for reference or
second day setup, use the raised
sights on the top of the laser to align
your Rugby to a second control point.
The scope is roughly aligned at the
factory. If a more precise alignment is
desired, first align the Rugby to a
second control point using the
procedure for Precise Alignment of the
Axes found in this manual.
A = Vertical crosshair alignment
Remote Control
The Rugby 400 DG Remote Control
(739854) is a full functioning, two-
way remote control.
The LCD display and the grade and
star buttons on the remote are the
same as on the Rugby.
The Power button
turns on only
the remote. When pressed it will
communicate with the Rugby to
receive current information.
Once communication is established,
the remote can be used to change
grade and setup parameters on the
laser.
If the remote is not within range or
otherwise loses communication, the
the lost communication screen will be
displayed.
It is important, to achieve specified
distances, that the remote be used
within the “line of sight” of the Rugby.
Press and hold the power button for
1.5 seconds to turn the remote off.
A
