Rugby 320 SG
Setup
14
4.3
Additional Setup Options
Additional setup options may be accessed in a second setup screen.
Changing the Setup
Options
When entering the setup screen, the EXIT window be highlighted.
To change the setup options in this window the buttons are used in the
following way:
Press the
STAR
button and the cursor will become a thick border around
the selected parameter. Once selected, use the UP and DOWN buttons
to change the parameter.
)
If no button is pressed, the display will revert to the main display after
ten seconds.
+
From the main operating screen, Press and hold the
UP
button, then press the
STAR
button to access the
second level setup screen.
Selects beam masking at the diagonals or at the corners.
Allows the Rugby to always start up with no beam
masking, or to save and start up with the last beam mask
setting used.
Allows the Rugby to start up with the H.I. Alert automat-
ically turned on, or turned off.
Allows the operator to disable the negative grade func-
tion of the Rugby. When disabled, negative grade cannot
be entered in the grade displays.
The
STAR
button is used to select or deselect the setup param-
eters.
The
UP
and
DOWN
buttons are used to move the cursor and
change the parameters.
Select the EXIT window, then press the
STAR
button to exit and
return to the main display.
