background image

Rugby 320 SG

Safety Directions

26

Warning

During dynamic applications, there is a danger of accidents occurring if 
the user does not pay attention to the environmental conditions around, 
for example obstacles, excavations or traffic.

Precautions:

The person responsible for the product must make all users fully aware 
of the existing dangers.

Operation of Charger:

Danger

The product is not designed for use underwet and severe conditions. If 
unit becomes wet it may cause you to receive an electric shock.

Precautions:

Use the product only in dry environments, for example in buildings or 
vehicles. Protect the product against humidity. If the product becomes 
humid, it must not be used!

Operation of Charger:

Warning

If you open the product, either of the following actions may cause you 
to receive an electric shock

Touching live components

Using the product after incorrect attempts were made to carry out 
repairs.

Precautions:

Do not open the product. Only Leica Geosystems authorized service 
workshops are entitled to repair these products.

Inserting and Removing the Batteries:

Warning

Batteries not recomended by Leica Geosystems may be damaged if 
charged or discharged. They may burn and explode.

Precautions:

Only charge and discharge batteries recomended by Leica Geosystems.

Warning

If the product is improperly disposed of, the following can happen:

If polymer parts are burnt, poisonous gases are produced which may 
impair health.

If batteries are damaged or are heated strongly, they can explode and 
cause poisoning, burning, corrosion or environmental contamination.

By disposing of the product irresponsibly you may enable unauthor-
ized persons to use it in contravention of the regulations, exposing 
themselves and third parties to the risk of severe injury and 
rendering the environment liable to contamination.

Summary of Contents for Rugby 320 SG

































Reviews: