beams both light up, and the machine will be self-leveling. Key
indication light is green.( If key indication light is red, and lines flash,
it indicates the lines is not level, please put laser level on much
flatter place, because the self-leveling rang is about 4
0
)
Turn Lock Switch at ‘ ’ position, laser level stop working.
2, Locked Mode:
When Lock Switch at ‘ ’ position, long-press key button, vertical
and horizontal laser beams both light up and flash every 5 seconds ,
the indication light is red.
Note: In this mode, the horizontal laser beam is fixed,and you can
get any angle of cross lines
Long time press key button, switch it off.
3, Power saving mode
When the tool is working, short-press key button, this tool enters the
energy-saving mode:
1. The first press, the brightness reduces to 80% of the maximum
brightness;
2. The second press, reduces to 65%;
3. The third press, reduces to 50%;
4. The fourth press, returns to the maximum brightness
SAFETY
WELCOME
SPECIFICATION
PRODUCT OVERVIEW
OPERATING
Laser Class
Laser Wavelength
Leveling Accuracy
Leveling/Compensation Range
Working Distance (Line)
Operating Time
Power Source
IP Rating
Operation Temperature Range
Storage Temperature Range
Class
Ⅱ
±3mm/10m
4°±1°
2×˝AA˝
IP54
-10
℃
–
＋
50
℃
-25
℃
–
＋
70
℃
1
.
Key board and indication light
2
.
Laser window
3
.
Lock switch
4
.
1/4’ mounting thread
03041907
Thanks for choosing TAVOOL laser level to help your
jobs. This user manual will provide you with valuable
information necessary for the proper care and mainte-
nance of your new laser tool.
PLEASE READ ALL OF THE INSTRUCTIONS
BEFORE USING THE LINE LASER
● SAFETY
● SPECIFICATIONS
● PRODUCT DETAILS
● OPERATING
● COMMON QUESTIONS AND ANSWERS
● MAINTENANCE
● WARRANTY
Before insert two pieces of AA batteries correctly, Please make sure
Lock Switch at ‘ ’ position.
And please keep the Lock Switch at ‘ ’ position during moving the
laser level or storage it.
It is very important!
1, Auto Self-leveling Mode:
Turn Lock Switch at ‘ ’ position, vertical and horizontal laser
• Read the Safety Instructions and Manual thoroughly before using
this product.
All users must fully understand and adhere to these instructions.
• While the product is in operation, be careful not to expose your
eyes to the emitting laser beam . Exposure to a laser beam for an
extended time may be hazardous to your eyes.
• Do not stare directly into the beam or view directly with optical
instruments or set up the laser at eye level.
• Do not disassemble the laser tool. There are no user serviceable
parts inside.
• Do not modify the laser in any way. Modifying the tool may result in
hazardous Laser Radiation Exposure.
• Do not operate the laser around children or allow children to
operate the laser.
• An exposure to the beam of a Class 2 laser is considered safe for a
maximum of 0.25 seconds. Eyelid reflexes will normally provide
adequate protection.
1
2
3
5
4
505~550nm for Green beam
30m for Green beam
First gear
:
7 Hours for Green beam
Second gear
:
10 Hours for Red beam
Third gear:
13 Hours for Green beam
Forth gear:
16 Hours for Green beam
LASER LEVEL
- 1 -
- 2 -
- 3 -
- 4 -
CUSTOMER SERVICE: [email protected]
Any problem, question or concern, please feel free to contact us via email,
we always stand behind our products to offer proper solutions and won’t
let you suffer any loss.
5
.
Battery compartment ( Please match the “+”“-”pole of battery to
the “+”“-”icon on the battery cover)
