8
Buttons
Rugby 200-3.2.1en
8 Head Tilt Arrow Buttons
This set of four buttons control the tilt
of the rotating head when the Rugby
200 is in manual mode. The left and
right arrow buttons also function when
the unit is used in the laydown position
to control alignment of the plumb beam
to a second control point. In manual
mode the arrow buttons allows the
operator to tilt the head to match an
existing line or slope. Pressing the
button will move the head in small
increments. Pressing and holding the
button move the head more quickly.
Rugby200-4 Head-up
Rugby200-5 Head-right
Rugby200-6 Head-down
Rugby200-7 Head-left
The Rotating Head tilts in the direction
shown.
In Laydown, the Top Plumb Beam
moves
upward.
The Rotating Head tilts in the direction
shown.
In Laydown, the Top Plumb Beam
moves from
left to right.
The Rotating Head tilts in the direction
shown.
In Laydown, the Top Plumb Beam
moves
downward.
The Rotating Head tilts in the direction
shown.
In Laydown, the Top Plumb Beam
moves from
right to left.
