18
Instruction manual V 1.6 – 10/2009
6
66
66
5
55
55
4.3 Unpacking and installation
(cont.)
Fig. 10
7
77
77
8
88
88
9
•
Take out the fixing module (
5
). To do so,
hold it by the top edge of the module and
in the recessed grip (
6
) and pull it out by
pulling upwards.
•
Lift the instrument (
7
) by holding it by the
base plate and under the instrument on
the back and lift it out of the formed cush-
ion (
8
).
Never hold the instrument for
transport by the handwheel or the
rotary knob for section thickness
adjustment.
Observe the correct resting angle
to the table to avoid pinching
your fingers.
•
Place the instrument on a stable labora-
tory table.
The two sliding elements (
9
) located on
the rear of the base plate make it easier
to move the instrument on the table.
•
To move the instrument, hold it by the
front of the base plate, lift it up gently and
slide it on its slides.
4.
Startup
