Leica MOJO RTK, User Manual

Page: 121 / 212

Normal System Operation
mojoRTK
121
Configuring NMEA Output, step-by-step
1. Switch on the mojoRTK console and from the Navigation screen press to
enter the main menu.
2. Use the main dial to select Settings -> Extended Features -> NMEA settings .
3. Select Output Enabled to turn NMEA output on, and then press .
4. Select Baud Rate to change the RS232 baud rate, and then press . Use the
main dial to scroll through the list of baud rates. Press to select a rate or
to cancel.
5. To change the output rate of a sentence select the desired sentence from the
menu, and then press . Use the main dial to select either Off , 1 Hz , 5 Hz ,
10 Hz or 20 Hz . Press to select a rate or to cancel.
)
Not all sentences support output rates greater than 1 Hz.