Name
Description
GEV234
USB data cable, 1.65 m, connects CC to iCG or CC to PC (USB)
GEV261
Y-cable, 1.8 m, connects instrument to PC – battery
☞
Skip the following steps if you have never installed Leica USB drivers
before.
If older drivers were previously installed on the PC, follow the instructions to
uninstall the drivers prior the installation of the new drivers.
1.
Connect your instrument to the PC via cable.
2.
On your PC, select to
Control Panel
>
Device Manager
.
3.
In
Network Adapters
, right-click on
Remote NDIS based LGS…
.
4.
Click on
Uninstall
.
5.
Set
Delete the driver…
as checked. Press
OK
.
1.
Start the PC.
2.
Run the
Setup_Leica_USB_XXbit.exe
to install the drivers necessary
for Leica devices. Depending on the version (32bit or 64bit) of the
operating system on your PC, you have to select between the three
setup files following:
•
Setup_Leica_USB_32bit.exe
•
Setup_Leica_USB_64bit.exe
•
Setup_Leica_USB_64bit_itanium.exe
☞
To check the version of your operating system, go to
Con-
trol Panel
>
System
>
System type
.
☞
The setup requires administrative privileges.
☞
The setup has to be run only once for all Leica devices.
3.
The
Welcome to InstallShield Wizard for Leica GS, TS/TM/MS,
CS and GR USB drivers
window appears.
☞
Ensure that all Leica devices are disconnected from your PC
before you continue!
Uninstalling the
previous drivers
Install Leica USB
drivers
40
Operation
