5
Using the Web Interface
Connection between the sensor and your device is established via Bluetooth.
☞
The following instructions are based on using Windows 10.
1.
Power on the iCA202.
☞
If you intend to use the Web Interface with iCA202 make
sure the external Bluetooth antenna is attached.
2.
On your computer go to
Start Menu
>
Settings
>
Devices
.
☞
Activate Bluetooth if not yet switched on.
3.
Click "Add Bluetooth or other devices".
☞
Make sure that computer and sensor are in reach for a
Bluetooth connection.
4.
Click Bluetooth and select the sensor from the list.
Wait for the connection to be established.
☞
The sensor can be identified by its serial number.
5.
Go to
Start Menu
>
Settings
>
Network & Internet
.
Under
Advanced Network Settings
click "Change Adapter
Options".
In the
Network Connections
page double-click on "Bluetooth Net-
work Connection".
Finally, right-click on the sensor that you have just added and select
Connect using
>
Access Point
from the context menu.
6.
Open a browser on your computer and enter the URL:
http://www.icasetup.leica-geosystems.com
User name is "leica", as password enter the serial number of the
sensor.
7.
Start configuring the iCA202 using the Web Interface.
☞
For mobile devices it is only required to pair the sensor via Bluetooth.
The header section contains a status information bar.
The footer includes information on the connected receiver, its serial number
and firmware version.
☞
The frame will always be visible independent of which tab you open
for further configuration.
Status information bar
The status bar shows the satellite status, internet connection, antenna config-
uration and receiver status information.
Getting connected to
the Web Interface
Web Interface -
Frame
30
Using the Web Interface
Summary of Contents for iCON aps 200
Page 1: ...Leica iCON aps 200 User Manual Version 3 1 English ...
Page 83: ......