background image

15

Leica HI 1210 Water Bath

7.    Warranty and Service

Warranty

Leica Biosystems Nussloch GmbH guarantees that the contractual prod-

uct delivered has been subjected to a comprehensive quality control 

procedure based on the Leica in-house testing standards, and that the 

product is faultless and complies with all technical specifications and/

or characteristics warranted.

The scope of the warranty is based on the content of the concluded 

agreement. The warranty terms of your Leica sales organization or the 

organization from which you have purchased the contractual product 

shall apply exclusively.

Service information

If you require technical service or replacement parts, please contact 

your Leica sales office or dealer who sold the product.
The following inputs are required:
•  Model name and serial number of the instrument.

•  Location of the instrument and name of the person to contact.

•  Reason for the service call.

•  Date of delivery.

Shutdown and disposal of the instrument

The instrument or parts of the instrument must be disposed of in compli-

ance with the local laws.

Special attention should be paid to the lithium cell of the electronic 

 circuit  board!

Summary of Contents for HI1210



















Reviews: