background image

Introduction

Leica HD C100 / Ref. 10 733 205 / Version 01

1  Introduction

1.1  About this user manual

In this user manual the Leica HD C100 camera system is described.

In addition to notes on the use of the instruments  
this user manual gives important safety information 
(see chapter "Safety notes").

X

X

Read this user manual carefully before operating the 
product.

1.2  Symbols in this user manual

The symbols used in this user manual have the following meaning:

Symbol

Warning 
word

Meaning

Warning

Indicates a potentially hazardous situation 
or improper use that could result in serious 
personal injuries or death. 

Caution

Indicates a potentially hazardous situation 
or improper use which, if not avoided,  
may result in minor or moderate injury. 

Note

Indicates a potentially hazardous situation 
or improper use which, if not avoided, may 
result in appreciable material, financial 
and environmental damage.

Information about use that helps the user 
to employ the product in a technically 
correct and efficient way. 

X

X

 

Action required; this symbol indicates that 
you need to perform a specific action or 
series of actions.

2  Product identification

The model code and serial number of the camera and the control 
unit are located on the identification labels on the rear side. 

X

X

Enter this data in your user manual and always refer to it when 
you contact us or the service workshop regarding any questions 
you may have. 

Camera Type

Serial no.

 
...

 
...

Control unit type

Serial no.

 
...

 
...

Summary of Contents for HD C100

























Reviews: