Assembly
8
Leica HD C100 / Ref. 10 733 205 / Version 01
6 Assembly
6.1 Installing the camera
The camera C-mount interface is screwed on to the C-mount
interface of the video adapter.
6.2 Installing the control unit
The control unit can be installed or set up as follows:
• In or on a stand
• Permanently screwed into place on an assembly plate
• On a drawer or a device cart
X
X
Set up the control unit on a suitable surface, for example in a
drawer or on a device cart.
Assembly in or on a stand
X
X
See Installation Manual for the respective stand
Fixed assembly with assembly plate
X
X
Screw assembly plate to stand or similar item.
X
X
Remove the 4 rubber feet on the bottom of the control unit.
X
X
Screw control unit to the assembly plate.
Install on a device cart or similar
X
X
Set up control unit on a suitable level surface, for example on a
device cart.
6.3 Select video format and operating
mode
Switch
Position
Assignment
1
ON
Service mode
OFF
Operating mode
2
ON
Service mode
OFF
Operating mode
3
ON
NTSC (60 Hz)
OFF
PAL (50 Hz)
4
ON
Service mode
OFF
Operating mode
