66
Battery connection
In case of battery connection please contact the
technical service of Leica.
Heating stages*
Heating stage with temperature range up to
approx. 45
°
C (Fig. 47):
Assembly: Detach the ordinary specimen stage
(only rectangular stages are suitable) from the
stage bracket by undoing the screw (28.13
→
p. 38) at the front of the stage and replace with
the heating stage (2 fixing screws). No special
objectives or condensers are required,
preferably use the UCA/P condenser with
condenser top S15,
→
p. 13. The heating stage
has its own instruction manual. Heating stage
350 (up to 350
°
C), not illustrated, always
requires the condenser outfit UCA/P-S15 and
objectives with working distances > 7 mm,
→
optics DM L/DM R data sheet.
Viewing attachments*
Dual viewing attachment L 3/20 for 2 viewers
(Fig. 48). The two viewers may either sit next to
each other (the image in the 2nd port is laterally
reversed) or opposite (image positions
identical). The telescopic support (48.3) should
always be set exactly, making sure that the
tracing device is not at a tilt to the microscope
and that the microscope stand is not deformed.
The fade-in arrow (48a, 1 – 2) can be moved in x
and y direction: Move the lever (48a, 1 – 2)
vertically or pull out/push in. If this lever is
rotated, the colour of the arrow can be changed
(red/yellow).
Fig. 48a
Dual viewing attachment
1
Movement of light pointer in x and y direction, change from
red/yellow by rotating, switchover of colour filter,
2
Brightness control,
3
Adjustment of arm support
The external power supply (illuminated arrow) is not
illustrated (socket underneath, next to the support)
Fig. 47
Heating stage up to 45
°
1 2
3
Summary of Contents for DM L
Page 1: ...Leica DM L Instructions...
