7
CaptiView / Ref. 10 746 768 / Version 01
Operation
5.2.2 Operation on the handle/footswitch
The following functions can be assigned to your handle/footswitch
to control your CaptiView:
"DIC: Image On/Off"
Switches the display with the superimposed data on/off manually.
The shutters are switched as configured in the user settings.
• "DIC: Microscope Data On/Off” Activates or Deactivates the
injection of the microscope data (see page 8 for details)
immediately
• "DIC: Shutter Control"
Opens or closes the shutter manually as pre-configured in the
user settings.
• "DIC: Brig"
Increases the brightness of the superimposed data.
• "DIC: Brightness –"
Decreases the brightness of the superimposed data.
5.2.3 User settings
You can configure the following settings for the user in the user
settings:
• Default brightness for image of overlay and non-overlay data
• Overlay mode
• Image Injection Channel
• DIC In Assignment
• Microscope data
• Illumination linked Brightness
Setting the default brightness for the image of overlay data and
non-overlay data:
X
X
Press the
or
button or click directly on the bar for
adjusting the brightness of the illumination.
Briefly clicking the
or
button changes the
brightness value in increments of 1. Holding down the
button with your finger changes the value in increments of
five.
Shutter settings for manual operation:
These settings can be adjusted on an intraoperative basis
via the CAN handle or the "DIC" screen of the control unit.
